Pressure Cleaning in Fremantle
Fremantle surfaces need the right pressure.
Pressure washing in Fremantle
Limestone paving & walls
Heritage courtyards & lanes
Driveways & paths
Render & painted walls
What we pressure clean in Fremantle
Limestone paving & steps
Heritage courtyards
Driveways & exposed aggregate
Verandahs & front paths
Render & painted walls
Which method does your Fremantle surface need?
| Surface | Method | Why |
|---|---|---|
| Concrete & aggregate | Full pressure clean | Hard enough to take it, lifts oil and grime |
| Limestone | Low pressure or soft wash | Soft and porous, pits under high pressure |
| Old brick pavers | Lower pressure | Protects the joints and the brick face |
| Render & painted walls | Soft wash | Kills mould without lifting paint |
| Timber verandahs | Low pressure | Avoids raising the grain |
How much does pressure cleaning cost in Fremantle?
| Service | Price | Minimum |
|---|---|---|
| Pressure clean (Restore) | $7 per m²+GST | $250+GST |
| Clean and seal, one coat | $15 per m²+GST, lasts 1 to 3 years | $750+GST |
| Clean and seal, two coats | $18 per m²+GST, lasts 3 to 5 years | $750+GST |
| Soft wash for walls and render | Quoted | Quoted |
How we pressure clean in Fremantle.
Look & quote
We check the surface, size and access, then confirm the method and price before we start.
Pre-treat
Where mould, algae or moss is present, a biodegradable treatment goes on to kill it at the root.
Clean
Full pressure for concrete and aggregate, lower pressure or soft wash for limestone, old brick and render.
Rinse & check
Surfaces rinsed down and checked for an even finish, with the option to seal straight after drying.
Why Fremantle paving goes black
Why Fremantle locals book GaleForce.
Heritage-safe
Local to Fremantle
Clean & seal
Insured, checked team
One local team
We also do window cleaning in Fremantle, pressure cleaning in Mosman Park and pressure cleaning across Perth’s western suburbs.
Fremantle suburbs we pressure clean.
Don't see your suburb? We service surrounding areas too, just get a free quote.
Pressure cleaning Fremantle FAQs
Pressure cleaning is $7 per m²+GST with a $250+GST minimum. Clean and seal is $15 per m²+GST for one coat or $18 per m²+GST for two, with a $750+GST minimum. Soft washing for walls is quoted, and we confirm the price before starting. Every rate is on our price list.
Yes. Limestone is soft, so we clean it at lower pressure and use a soft wash treatment for mould and algae rather than blasting the surface. That lifts the staining without pitting the stone or washing out joints.
Yes. We clean paths, verandahs, courtyards and rendered walls on heritage homes across Fremantle, South Fremantle, Beaconsfield and White Gum Valley, using low pressure or a soft wash on older and painted surfaces.
If you want it to stay clean longer, yes. A Dulux sealer closes the pores so stains sit on top instead of soaking in, and it slows mould returning. One coat lasts one to three years and two coats three to five. See driveway sealing for details.
We treat orange bore water marks during the clean and lift them where they can be lifted. How far they come out depends on how long they have been there and the surface, and we'll tell you what to expect at the quote.
Yes. We are based on Harvest Road in North Fremantle, a short trip from Fremantle, South Fremantle, Beaconsfield, White Gum Valley and Hilton. Request a free quote with a photo, or call 0401 065 516.
Ready for a cleaner courtyard?
Request your free quote
"*" indicates required fields