Skip to main content
Galeforce Window Cleaning Logo
driveway cleaning & sealing - perth's western suburbs & fremantle

Driveway Cleaning & Sealing in Perth's Western Suburbs

Clean and seal from $15 per m²+GST for one coat or $18 per m²+GST for two, including the pressure clean ($750+GST minimum). A Dulux sealer in gloss or natural keeps driveways, paving and limestone cleaner for longer, so stains sit on the surface instead of soaking in.
get a free quote
0401 065 516
180+ verified 5-star Google reviews
A person wearing ear defenders and a "GALE FORCE" shirt uses a yellow surface cleaner to wash outdoor pavement near a white van and a green skip on a residential street.
Clean, Then Seal

Driveway sealing that keeps stains on the surface.

Clean and seal is a two-stage job. We pressure clean the surface back to bare, lifting oil, tyre marks, mould, moss and grime, then apply a Dulux sealer once it is completely dry. The sealer closes the pores in concrete, pavers and limestone, so leaf tannin, garden dirt and spills sit on top where a hose or broom can deal with them. It also slows the black mould and algae that come back on shaded paving through a Perth winter.
get a fast, free quote
What We Seal

Driveway and paving sealing in Perth

Four surfaces we clean and seal most often, each with the pressure and the finish matched to the material.
01

Exposed aggregate driveways

A gloss sealer brings back the colour of the stones and gives exposed aggregate that freshly laid, wet look. We clean between the stones first so the sealer locks in clean aggregate, not dirt.
02

Concrete & coloured concrete

Plain and coloured concrete driveways, paths and garage aprons. Sealing slows oil and tyre staining and stops coloured concrete fading as quickly in the sun.
03

Brick & concrete pavers

Pavers around driveways, courtyards and pool surrounds. We clean the faces and joints, then seal to slow weeds, moss and the salt and chlorine wear around pools.
04

Limestone paving & walls

Limestone is soft and porous, so we clean it at lower pressure and seal it with a natural finish unless you ask for gloss. On older Fremantle and Mosman Park homes that keeps the original look intact. More on limestone cleaning and sealing.
Gloss Or Natural

Surfaces we clean & seal

You choose the finish. Gloss deepens the colour and suits exposed aggregate and coloured concrete. Natural protects the surface with very little change to how it looks, and suits limestone and heritage paving where a shine would look out of place.
get a free quote

Exposed aggregate

Driveways, paths and garage aprons

Concrete driveways

Pavers & courtyards

Limestone paving & steps

Alfresco & pool surrounds

Patios, entertaining areas and pool edges
One Coat Or Two

One coat or two coats of sealer: which suits your driveway?

One coat suits lighter-use paths and areas where you want a lighter level of protection. Two coats build a thicker film that lasts longer, which makes it better value over time on a driveway that takes daily car traffic, a home you are staying in, or paving around a pool where chlorine and salt water wear the surface. The second coat adds $3 per square metre and roughly doubles the time before you need to reseal.
Detail One coat Two coats
Price $15 per m²+GST $18 per m²+GST
Typically lasts 1 to 3 years 3 to 5 years
Best for Lighter-use paths, lighter protection Daily car traffic, pool surrounds, homes you are staying in
Minimum charge $750+GST $750+GST
Includes Full pressure clean, one coat of Dulux sealer Full pressure clean, two coats of Dulux sealer
Prices · Clean & Seal

How much does driveway sealing cost in Perth?

Clean and seal is priced by the square metre and includes the pressure clean. Our pressure cleaning cost guide has worked examples for common driveway sizes. One coat is $15 per m²+GST and two coats are $18 per m²+GST, with a $750+GST minimum. A 40 m² driveway works out at $600+GST for one coat and $720+GST for two, so the minimum applies to both, and it often makes sense to add the front path or alfresco area to the same visit. If you only want a clean without the sealer, pressure cleaning is $7 per m²+GST with a $250+GST minimum.
Detail Clean only Clean & seal
Price $7 per m²+GST $15 per m²+GST (one coat), $18 per m²+GST (two coats)
Minimum charge $250+GST $750+GST
40 m² driveway $280+GST $750+GST (minimum applies)
What it does Lifts dirt, oil, mould and grime Everything in the clean, plus a sealer that keeps stains on the surface
Measured, Cleaned, Dried, Sealed

How our clean and seal works.

The price is set before we start, and the sealer only goes on once the surface is completely dry.
01.

Look & measure

We confirm the area in square metres and agree the finish and number of coats, so you know the price before any work starts.

02.

Pressure clean

We clean at the right pressure for each surface and treat oil and rust marks where they can be lifted.

03.

Dry

The surface has to be completely dry before sealing. If rain comes in, we move the sealing day rather than seal damp paving.

04.

Seal & cure

We apply the sealer evenly, with the edges done carefully, and tell you on the day how long to keep feet and cars off.

A man wearing ear defenders uses a yellow surface cleaner to jet wash a stone driveway in front of a modern house.
Salt, Bore Water & Shade

Why coastal driveways need sealing

Salt air, reticulation on bore water and a long hot summer are hard on unsealed paving. Bore water leaves orange rust marks, salt breaks down the surface and shaded areas go black over winter. A sealed surface resists all three, and the next clean is quicker. We are based in North Fremantle and seal driveways and paving across Fremantle, Mosman Park, Cottesloe, Applecross, Attadale and the rest of Perth's western suburbs.
The GaleForce Difference

Why choose GaleForce for driveway sealing.

We clean before we seal, never seal a damp surface, and back every job with $10 million public liability cover.
0401 065 516

Price set up front

Measured in square metres, with the finish and coats agreed before we start.

Right finish, right surface

Gloss for aggregate and coloured concrete, natural for limestone and heritage paving.

Dulux sealer

A Dulux sealer in gloss or natural, applied evenly across the whole area.

Insured, checked team

Working at heights tickets, police checks and $10 million public liability cover.

One local team

We also handle your pressure cleaning, window cleaning and gutters.

Where We Work

Driveway sealing suburbs we service.

Driveway cleaning and sealing across Fremantle and Perth's western suburbs, from Cottesloe, Mosman Park and Claremont to East Fremantle, Attadale, Applecross and Coogee.
Cottesloe
Mosman Park
Peppermint Grove
Dalkeith
Claremont
Swanbourne
Nedlands
Applecross
Attadale
Fremantle
North Fremantle
Coogee
North Coogee
Perth's Western suburbs

Don't see your suburb? We service surrounding areas too, just get a free quote.

Good To Know

Driveway sealing FAQs

Clean and seal is $15 per m²+GST for one coat or $18 per m²+GST for two, including the pressure clean, with a $750+GST minimum. One coat lasts about one to three years and two coats about three to five. We measure the area first, so you know the price before work starts. Every rate is on our price list.

With our Dulux sealer, one coat typically lasts one to three years and two coats three to five years. Heavy car traffic, full afternoon sun and chlorinated pool water wear it faster. When water stops beading on the surface, it is time to reseal.

Yes, every time. The pressure clean is included in the clean and seal price, so the sealer locks in a clean surface rather than dirt, mould or oil.

Yes. Limestone is soft and porous, so we clean it at low pressure and usually seal it with a natural finish that protects without adding shine. Sealing slows the black mould and staining limestone picks up in shaded spots.

Gloss deepens colour and suits exposed aggregate and coloured concrete. Natural protects with very little change in appearance and suits limestone, pavers and heritage homes. If you are unsure, ask us on the day which suits your surface.

Only once the surface is fully dry. Sealing damp paving traps moisture and can go cloudy, so if the weather turns we move the sealing day rather than rush it.

We will tell you on the day how long to keep feet and cars off, so the sealer cures properly.

If you are in Fremantle or Perth's western suburbs, yes. We are based in North Fremantle and clean and seal driveways from Cottesloe and Claremont to Attadale, Applecross and Coogee. Send a photo through our free quote form or call 0401 065 516.

free quote

Ready to seal your driveway?

Send us a photo of the driveway or paving and we'll come back with a measured price for one coat or two.
0401 065 516
Fremantle & Perth's western suburbs · Calls answered 7 days

Request your free quote

We'll be in touch within 24 hours.

"*" indicates required fields

Name*
Surface*
Address*
How did you find us?*